Case thread. The bigger the better. R8 or H8

Case thread. The bigger the better. R8 or H8.

Other urls found in this thread:

youtube.com/watch?v=3a7kKKPs6J8
newegg.com/Product/Product.aspx?Item=N82E16811139015&
sharkoon.com/product/1678/16860#desc
newegg.com/Product/Product.aspx?Item=N82E16811133027
twitter.com/SFWRedditVideos

muh case. It looks fat from this angle.

Love this case

ok

is this case dated?

I like the overall design, but I'm not putting my components inside a fucking advertisement for nvidia, and fuck EVERYTHING about that color.

If it weren't for that bulge on the side panel, I would really like it.

The side panel case fan cutout just screams "cheap case I got from Best Buy", too.

>The bigger the better
Okay.

What's the name of the case?

Case Labs Magnum. I believe that is the single wide.
Their stuff is actually really good and they have a lot of configuration options, but their Magnum cases are laughably huge.

My case. I fucking LOVE ricer cases and I don't give a fuck what other people think.

i challenge someone to actually post a timestamped picture of this case

This is mine.

it wont happen

how do you open your door?

best case coming through

They probably move the computer since the desk seems to be in the way?
OP said the bigger the better so I just grabbed a caselabs picture as they do offer some huge cases.
Although this one is bigger. youtube.com/watch?v=3a7kKKPs6J8

...

Shouldn't the top fans be offset away from the mobo. I'm sure Fractal Designs must have a good reason for this.

All that for an aircooled rig with a single case fan. I cringed pretty hard.

"Now this is nice" - Sup Forums

Just bought this case and the rest of my parts get here tuesday so I can set it all up. Is all the room inside worth it for set up?

This is the one I was considering, the amount of fans arouses me.
2 fans in front of drives
2 fans behind drives
2 on top
1 on back
>newegg.com/Product/Product.aspx?Item=N82E16811139015&

That and the way the door swings and locks with the little clips.

This is my current case, best I have ever had thus far

- Full ATX Tower
- USB 3.0 x 2 USB 2.0 x 2 eSATA connector x 1 MIC & Speaker (support AC'97 & HD Audio) Front Ports
- 4 External 5.25" Drive Bays
- 6 Internal 3.5" Drive Bays
- Wing Shape Aluminum Front Bezel
- Breath Lighting effect
- USB 3.0 superspeed
- Top-mounted HDD hot swap Docking Station
- VGA TripleMax 33cm
- CableClear cable management
- Liquid cooling ready
- Innovative 5.25" & 3.5" tool-free design
- Combat Headset Holder
- Heightened footstand enhances intake airflow

HDD Air Cooling System:
1. Front (intake) : 200 x 200 x 30 mm Blue LED fan x 1 (600~800rpm, 13~15dBA)

CPU Air Cooling System:
- Top (exhaust) : 200 x 200 x 30 mm Blue LED fan x 1 (600~800rpm, 13~15dBA)
140 x 140 x 25 mm or 120 x 120 x 25 mm (Optional)
- Rear (exhaust) : 140 x 140 x 25 mm Turbo Fan (1000rpm,16dBA)

VGA Air Cooling System:
- Side (intake) : Plug & Play 200 x 200 x 30 mm fan x 1 (600~800rpm, 13~15dBA)
- Bottom (intake) : 120 x 120 x 25 mm fan (Optional)

Running an Arc Midi R2 right now. Things get pretty toasty here in summer (35c+ ambient temperature is fairly common), so I didn't want to risk overheating by going with a define. As I expected, I'm already getting 80c+ on a cleaned and repasted 760 (wonder how higher it would be not sitting on an airflow oriented case), and the thing is still pretty quiet with the right components, so I'm certain I made a wise choice.

That side panel ruins it.

Everything else could make it really nice OEM look case.

...

1/10 for everyone.

None of you plebs have an intricately handcrafted wooden case.

Not yet, but that is a project I have seriously considered. It would be pretty easy and look a hell of a lot better than half the cringey ass gaymen cases they sell these days.

>The "I want to show off my internals, but I'm not proud of my GPU" case

BIG

Fractal Define S. Because drive bays are so two thousand and late.

how does it look inside? Did you make your own mounts for everything or is it hacked together?

So you have your OS on a USB or something? Where are the HDDs?

On the otherside. Has space for 3 HDDs and 2 ssds

Forged with the strength, mobility, and timelessness of real Japanese Steel. Ganbare!

Opinions ?
sharkoon.com/product/1678/16860#desc

It's easy as fuck to make a proper mount for an HDD or motherboard, the PSU would be a little bit of a challenge though.

That case reminds me of the trap from Ghostbusters

...

...

It's clearly a fried chicken take out box. Are you blind?

Jokes on you, im running a GTX 1080 #SuckMyBalls

Doubt it, or you would have posted a picture with a timestamp.

believe what you want. I dont care. unlike you I dont need to prove anything

>I lied on the internet and can't prove anything.

I'm seriously considering getting a Mountain Mods U2-UFO for my next build. It's just about the only case that would allow for a horizontally mounted motherboard WITHOUT sacrificing 5.25in bays.

>sharkoon.com/product/1678/16860#desc
Nice subwoofer.

>Midi tower
>MIDI TOWER
>M I D I
>T O W E R
>M I D I
>I
>D
>I

Did you make this?

>Check specs

Uhh sharkoon, a midi tower is supposed to be a smaller variant of mid towers, not larger

No, read my post. It's a Mountain Mods U2-UFO. I'm /probably/ going to end up buying one.

It's a pretty neat (if not terribly pretty) case. Very modular (each side of the cube can be rotated any way you like), spacious but not stupidly huge (18x18x18 cube), lots of panels available with different fan/window/5.25 bay options. Only two issues are the price and the less-than-sleek aesthetic.

Did someone say a Xbox huge case?

newegg.com/Product/Product.aspx?Item=N82E16811133027

So besides size and maybe looks it's fine? I looked for a cheap case with 4 frontal usb ports dust filter and 3 installed fans.

Oh I thought you already had it. Don't know its price, but the case doesn't seem that hot to me. From what I'm seeing on a review, size is the only thing it has going for it. Fans are loud and the temperature results weren't that impressive.

What is your budget and country?

Germany would like to spend max 60€ on the case.
I'm planning a 800€ build with a 480. Pic related are the parts for 510€ but psu will be changed to one with 550 watt since I want to oc the card.

The s28v costs 53€.

>60€

Way too much for that. Fun fact is when I saw the case I thought "I'd pay 40-45€ max for it", and in the review I read they thought the same.

At 60€ you have much better options, such as the aerocool 800, Corsair 100r, fractal design core 2500, bitfenix shinobi, among others.

Out of these, personally I'd choose the fractal. They will all have similar cooling potential (with a slight edge for the fractal, as I said), so you can choose based on design

Thanks for your suggestions.
Could you recommend some nice price/performance fans? (Would like to have 3 or 4 silent ones since at this price there is no insulation.)

I really like the aero-800 but that window and led-fan.. looks like I'll get a Fractal Core 2500.

not him but, corsair af120 or af140 (120/140mm)

If you like the 800 but hate the window you can either step down to the 500, which has no side window, or stretch it a bit and get the 1000 with a smaller window, but is wider and can take both taller cpu coolers and 140mm fans on front and top. The 1000 should be 60 something.

fuck

>10€-15€
Thanks but three of them cost almost the same as the case.
Nice, again tyvm.

>being this much of a poorfag

What about Nanoxia DX12 120?
Costs the half.

If they're too much for you, you can try looking at the noiseblocker blacksilent series. I had those a few years back in both 120 and 140mm, and can confirm they're pretty quiet. Also I'd suggest replacing the aerocool fans with these, I can tell from experience they can be a bit loud

Which case should I get for good air cooling performance and EATX support? The two CPUs and chipset are passive cooled. I've been looking at the Fractal Design Define XL R2 and Phanteks Enthoo Pro. The latter one supports SSI EEB which is a plus, but not necessary, but the first one looks a lot better in my opinion. Any other suggestions?

Not cheaper...
Just getting Nanoxia Deep Silence NDS 120x120 probably.

No, they are, I got mine for around 7€ each. Maybe you saw the blacksilent pros, which are uprated. The regulars are easy to spot (translucid blue blades, they have no leds, no worries about that).

In fact I just check the german prices on computeruniverse, the ones at 15€ are the pros, regulars at 6-7

These are the cheapest 120mm blacksilent noiseblocker at computeruniverse.

DELETE THIS

I really, really like this case.

r8 or h8

>Led fans and window
Disgusting

...

>not having a window

can't into cable management user and what are you some kind of faggot who doesn't like to make his case looks nice a sleek with white LED's

stay being a shitter.

Seriously complaining about a couple €? You really want to go as low as you can don't you?

Arctic F12 then.

They are, they have this form of ""I'm mature"" Autism where anything the group deems immature like having a GPU or Windowed cased is gaymer tier

pretty autistic desu

I have the same case and I almost got meme'd hard with the stupid bracket and slide-in thing for the hard drives. Why the fuck are they mounted sideways? I had to dig out an L-shaped SATA cable otherwise I would have had to leave the side of my case off just for it to fit.

Who else source 210 here?

Do you have a top view pic? Did it come with dustfilters? Is it true you need a to buy a frame for smaller drives? How's the sound does something vibrate?