What's wrong with this pc? Somebody asked me to repair it...

What's wrong with this pc? Somebody asked me to repair it, and after lots of tests I changed the power supply and the motherboard.

I push the ON button and nothing. No beeps, no noise, no fans moving... Any idea?

>24pin not plugged in

are you fucking kidding me?

I unplugged it all now, to see if something is wrong.

maybe the front i/o headers are broken

maybe you dont have the front i/o connectors on the headers correctly

maybe the power button the case is broke

maybe the cpu is fried

maybe they fried a VRM trying to OC an older 775 board

so many things, its so hard just to look at a pic an guess what the fuck is wrong

>maybe the front i/o headers are broken
>maybe you dont have the front i/o connectors on the headers correctly
I changed the motherboard

>maybe the power button the case is broke
I tried to turn it on with a screwdriver (making contact).

>maybe the cpu is fried
Even if it's fried something should work.

>maybe they fried a VRM trying to OC an older 775 board
Absolutely not.


Btw, I heard that he had to change the motherboard too, less than a year ago.

Check the spacers below the mb.

Have you tried turning it off and then on?

>mb starts smoking
>everything is fine now

what wizardry did you perform

...

Mobo in pooper, post pics.

I connected all again, motherboard supply, RAM...

...

see

Check the power supply

Then throw it all out and get a NUC which is probably faster

Plug it in.
Then reseat the ram.
Fix that- ADD some fucking RAM

Checked, well placed. But this was a good idea.

You don't need RAM for it to power on

The problem here is that it doesn't do nothing. No matter if you change the motherboard and the power supply.

Mobo or power supply ded

Did you turn the power supply power on? Did you plug it into a wall socket?

Man, you need to plug that 4-pin connector from the psu to the mb.
So now, plug the 24-pin and 4-pin connector to the mb and try it again.

try a different wall socket

Well no one can really help you beyond what's been said cause you're sharing FUCK ALL for any details.

Start with the basics like making sure the PSU is actually known/tested good and you have a working power button or are shorting the correct pins

Op here I forgot to plug it in lawl xd

I'll assume you did all the basic stuff, and since you already swapped mb and psu, I once had a cpu do this on me, nothing would turn on, and both mb and psu worked fine with some other parts

you changed the mobo and psu, what about the cpu? try replacing it.

Psu is bad, cpu may be bad, mobo setting on risers?

change cable

try another outlet

test ram and cpu

Don't impersonate me, please. This is a serious thread.

We seriously all this dense? You don't have any Ram dummy

Kys faggot nigger

test

Why the flying fuck are you still using PATA?

he said it doesn't even start up, the fans should start spinning even without RAM

On button is probably broken, try shorting it.

Not shorting the mobo on the case are you?

There is no ram you fucking idiot,

Already tried.

plz take another pic
Also have you connected this time the power to the mobo.
Stop wasting people time

Here.

I begin to think that the new power supply don't work. I tried to bypass both supplies, and the fan of the old one started spinning, but doing the same with the new supply leads nowhere.

And yeah, all cables were connected, I don't know why everybody pay attention to the fucking pic.

cos IDE, join the 21st century you peasant

Not mine. Pic related is my computer.

so use the power supply that turn on
www.youtube.com/watch?v=ixcWCrYpw3Y

Thne connect it to mobo and test it. Also some mobo doesnt power on without ram

then you know exactly how to fix it, tell him to stop being a peasant and buy a modern platform.

AND GOD DAMMIT YOU HAVE A SAGGY GPU DUDE !!!!!

Yes you do yo stupid faggot

I tried both power supplies. With and without RAM, HDD... But the supply that turn on doesn't work.

I already told him. Jews everywhere.

>AND GOD DAMMIT YOU HAVE A SAGGY GPU DUDE !!!!!
I know. This is a heavy GTX770.

No you don't. It won't POST or let you into the BIOS but it will turn on and throw a RAM error, usually a continuous beep.

think this depends on your definition of "on"

depending on the definition of retardation, you are definitely a retard

i/o connectors r fucked.

Use the supply that work but this time disconnect everything but the power cables. You need to short circuit the power button on the System Panel Header

I know what the problem is

you haven't installed gentoo

that is some serious sag man, i'm sure you're already aware and all, but it gives me the creeps just to look at it

Just PMd you the fix, mods you can lock the thread

-------------
"We are the knights who say ni!" - Monty Python

So many people prefer to live in drama because it's comfortable. It's like someone staying in a bad marriage or relationship - it's actually easier to stay because they know what to expect every day, versus leaving and not knowing what to expect. Ellen DeGeneres

420 ride or die - me

I know it's terrible, I'm trying to solve it. Anyways it's a DirectCU II OC with a nice backplate (pic related).

im fuxking choking
thabks based user

I am offended and triggered by this faggotry.

I need to stamp on some kittens to calm down.

Away with you, useless shitter. Away...

Ok, I tried with a 3rd power supply. Nothing. And I know that this supply works.

Had this problem a while back, you can find the fix here

I had this issue a few years back, the following shows a clear diagram of what was wrong and how to fix it.

Link Below:

disconnect everything from pc and mobo
take out battery
push power button couple times