You guys told me if I was going to get the network+ that I might as well go for the CCNA
Well, pic related arrived, here I go.
Henry Martinez
Managed to get a cisco 1921 from a customer. Do I use this purely for PPPOE with a firewall behind it or just use it as an "all in one"?
Any good resources on correctly configuring one?
Ryder Richardson
Alright, how do I set up gns3 and is it worth it
Elijah Rivera
I connected my router/ap to my modem/router/ap via wan. They are in the same subnet.They both have dhcp on. router/ap is in gateway mode.
Is this fine ?
Henry Reed
>Install from repo >Select folder with firmware images >Wow you're done
Justin Fisher
Thanks for making this t. OP from the previous thread
Also for black Friday I got 2x 10g dual port Chelsio NICs for 37$. Hopefully they work well. The Mellanox ones were EOL and had terrible BSD support. Gonna use a generic direct attach cable between them
>PPPoE Why user? VLANs + /30 is better IMO
Gabriel Lewis
I tried setting it up before but I couldn't find an IOS image. do you know where I could get them?
Samuel Gonzalez
afaik yes but it is very inefficient design put ap in bridge and connect on the lan port of the ap. set gw to modem
Aiden Davis
The ones I have were given to me personally under promise of secrecy. Google/torrents should yield results. If you know anyone with a cisco account you can ask them to pass you some from the official site.
Kayden Harris
Let it be known that picrelated is the only acceptable standard.
Jeremiah Foster
Oh I got an IP can for 61.4$ from Jet Dahua 3MP 3.6mm. Should be nice to make it work with Bluecherry. I have 2 Hikvisions just set up as well
Parker Brooks
if you still have them would it be possible for you to toss them mega?
I found these on the honeypot bay, but they're 3-4 years out of date. Downloading them anyway.
Jordan Phillips
Here is the physical portion of my CCIE lab: -2950x1 Cisco Cata Switch -3750x2 Cisco Cata Multi-layer Switches (sometimes running StackWise) -5505x1 Cisco ASA -2851x3 Cisco Integrated Service Routers -Netgear N-150 Wireless Router -7940x2 Cisco VoIP phones -Raspberry Pi as NTOP / TFTP server -Windows Box as PRTG server / SPAN port-mirroring
The rest of my lab studies will be done through GNS3 and INE's rack rentals.
Nathan Price
Here is a pic
Adam James
ccna guy here is this overkill or is this really the bare/recommended minimum for the CCNA cert
Parker Cox
I said CCIE not CCNA
Christopher Brown
oh my bad could I get away with just gns3 and a catalyst switch for the CCNA?
Hudson Lopez
Yea you would be fine with that IMO The more immersed you are the better though so don't go full jew when buying a lab
Nathan Ward
Make that two catalyst switches and you're golden.
Lucas Perry
>IPFS what does this have over any other P2P?
Jackson Mitchell
My internet is too shit to upload them any time soon. They aren't any newer either.
Matthew Martinez
>promise of secrecy you're a retard, there is nothing identifing in the images
if you google the image name for whatever device you want, you can generally find them. if you cant just go back 1 or 2 versions and they'll be somewhere, and a lot newer than a 3+ year old image
Landon Powell
>you're a retard, there is nothing identifing in the images But there's things identifying me if I upload them, derrr
Colton Stewart
>But there's things identifying me if I upload them, derrr no there isnt. thinking cisco images are something special
Brayden Morris
>no there isnt Tell me more about this wonderful world without IP adresses and websites that don't store your information
Hudson Lewis
>I'm pretending i can do something with a IOS image >I think cisco is monitoring every connection to see who is pirating images
Nolan Thomas
Hmm, I wonder who could be behind this post.
Grayson Gray
Someone who actually has cisco gear at home, rather than a copy of gns3 who doesnt even know how to use it
Chase Morris
Why would you even have cisco stuff at home? >you don't know! Top fucking kek
If you're so carefree upload the images and see how it goes.
Ethan Rogers
If the fag wants the images i have I would
Colton Hernandez
fak u
Jace Ortiz
CCNA guy again I'm desperate for the images
Benjamin Cooper
I have Catalyst 3560G, 3750E, Aironet 1140 and ASA 5510. Which do you want?
Camden Ramirez
man, I'd like them all if you're feeling generous
Austin Richardson
I just passed CCIE. I can now stop being a stocker at Wal Mart.
If you need something else, as I said before, go to Cisco's downloads site, find the device you want an image for, google the file name and generally some place is hosting it.
Kayden Baker
I'm hoping to become a cashier at the dollar store with my ccna
>decide to setup a Cisco Prime Infrastructure VM >no devices added or being monitored, just going through the initial setup >choose the express config with only 4 vCPUs and 12GB RAM >pic related why