Sup. I've searched through the Internet and never found the answer, can you help me, Sup Forums?

Sup. I've searched through the Internet and never found the answer, can you help me, Sup Forums?

Trying to launch PC with gtx1050ti, having 1 long and 3 short beeps, display is black.

Replaced the gtx 1050 ti with amd 280x = working fine.
Replaced the gtx 1050 ti with gtx 460 = working fine.
Inserted the gtx 1050 ti into another PC = working fine.

Changed the cable from DVI to HDMI = still black screen and beeps of error.

Motherboard is Rampage II Extreme with the last bios.

I don't know what to do, I've tried everything.

Install gentoo

I can't install gentoo, because the display is not working.

Mother board issue?

Working fine with another video cards, dude.

Nvm. Didn't see the bottom of the OP

Ok, any other suggestions?

Your shit's all fucked up man.

The problem is you've got too many beeps. Put out less beeps and you should be fine.

Reinstall driver. First time didn't take.

Video card drivers, or motherboard?

Shiiiiiiiiiit

Try deleting the driver

The videocard drivers, let the system detect the card.

Sounds like your DRAM is bad or not seated properly.

If your motherboard has a PCi express driver, reinstall that one too.

Plug in the power.

Don't know how it could help, because the display is not working from the start. There's no errors (or I can't see them)

I suggest taking out your RAM sticks one at a time(following you mobo's proper RAM assignment in reverse) and then putting them back in correctly.

How can I check if DRAM is ok?

Whats power supply?

see

I've plugged, lol. The other cards are working great with the same power cables.

Thermaltake 750W

Just Google your motherboard and see what the beeps represent

put in the original card or lack of one it came with

boot, enter bios

turn off secureboot in the bios

reinstall new card

you're welcome

Proper RAM assignment is putting them in same colored slots to make it dual channel? (my mb can into triple channel, but I use 2 ram sticks)

I can't boot without card, because my MB doesn't have the video output. But I'll try your suggestion with the gtx 460, thanks.

Try turning the system on with just one stick in. If that doesn't work try another stick. If it still doesn't work it is probably not the RAM and is likely the MoBo.

whatever card was in it last time it worked - probably the card you bought the machine with

Just bang the top of it a couple of times

use other pce port, always had this problem with asus mobos, from sound to network to gpus some of shit just like other slots

I've tried. 280x and gtx460 works in every slot. 1050 ti not working in the same slots.

Usually proper RAM assignment is something along the line of:

CPU is here-->[ ] ||||

User's Manual > Chapter 2 > One long four short beeps = hardware component failure; one long three short beeps = No VGA detcted

You get that op?

I have 6 slots. A1 B1 A2 B2 A3 B3. Ram sticks are in the A1 A2.
I can into google. But how to fix it?

OK op well guess you are gone. Best of luck

I don't get it op. Obviously the card

You need a bigger PSU peasant

Why the fuck do you think this is the card? It works perfectly on the other PC, I've told you.

The gtx460 and 280x needs more W than 1050 ti.

Wait, OP does is the CPU you are using an APU?
If it is you need to change the settings so it can use GPU.

Holy shit dude. Why are you being an ass when I'm trying to help you

Reset bios

VGA isn't compatible with your motherboard.

Or it isn't properly seated/connected.

I'm not saying the card doesn't work, but there is a conflict using it in that particular pc

Because if you read my opening post you see that I've tried to put the gtx1050ti into another PC.

That is the problem. So don't be a dick when I'm trying to help. Apologize now op and I will continue to support you

does your motherboard have a battery you can pop off? Do that first

There is also two short pins dedicated to allow you to short it (while its off and unplugged as well)
Once the short is done, pop the battery back in and try rebooting.

this should reset the bios

My cpu is i7 920. How can I know it is using APU or not?
And what settings should I change?

I'll try. But I don't know how.

Where can I find which VGA's are compatible and not? I've found nothing about rampage 2 extreme and gtx 1050 ti.

Try to read the op post before you post.

I'll try, thanks.

Fucking funny op I diagnose the problem but you ignore me and continue to listen to these guys when they were spewing all kinds of other information to. So keep listening to them. Lol

Lmfao ass of obviously I did this how I knew what the problem was

OK!
Why the card and what can I do to make it work?

>My cpu is i7 920. How can I know it is using APU or not?
Unplug your GPU from the system and start up the machine. Go into the bios and change the video settings from onboard to a video card.

Also, it is an APU.

It is Sup Forums user, hard to know who is right or wrong.
This is the wild west.

I suggest reinstalling sys 32. But i work for apple so idk

I don't have integrated gpu.

This thread is full off fuckards that find a way to bend CPU socket pins.
"It came like that!"
Tools

>i work for apple
It's okay. Many people's parents are siblings these days.

Have you tried deleting System 32?

Mobo not reading card. Update bios. Turn off secure boot. Reseat card.

>I don't have integrated gpu.
>ramage ll extreme
>looks at supported cpus
>all come with integrated graphics
lolwut

It may simply be that Windows is trying to load the outdated incompatible 32 bit drivers. If you delete this folder, then it will allow Windows to load the proper 64 bit versions.

THread is full of morons, one guy gives the right solution everyone else tries so hard to troll this fag

The bios is the latest version. I'll try turning off secure boot, thanks. Reseating cards not working. Tried more than 10 times.

Install Gentoo

I honestly wanted to help you, but you were automatically a dick to me and continued to listen to people that were obviously just guessing. Best of luck. It's not a big problem. You will figure it out. Next time when a guy who actually knows what they doing tries to help. Maybe don't be a dick and definitely don't blow him off. Easy fix. Good luck

There are no video outputs on the motherboard. There's no way to run the display without video card.

How are you connecting the extra power cable from your psu to your gpu? My 1080 wouldn't accept the 8 prong adaptor and only works with 6+2.

What guy?
Ok, bye, fatty.

I have 6, 6+2, 8.
For 280x I use 6+2 and 8.
For gtx 460 I use 6 and 6(without 2).
For gtx 1050 I've tried both 6 without any progress.

The one you told to fuck off.
LMAO KYS OP YOU ARE A FUCKING IDIOT.

...

They are shit.

Ah, you're sucking your own dick, lol.

Try not seating it all the way down. Could be a pin issue

okay sounds like a pin is damaged, try using a different source output.

Doesn't just run off pci-e you need to hook up the power supply. Do you have enough wattage? The 1050ti doesn't take much.

Not even samefag, good luck never solving shit.

So that HDMI and Firewire port are in my imagination? OP is a troll confirmed.

A pin can't be damaged if the card works perfectly fine else where, unless the OP damaged the motherboard like the imbecile I think he is.

It works fine on the other PC.

Try without the 6.your pcie16 slot should be more than enough to power it.

Install gentoo then and see if it will fix your display.

Hahaha, I'm loving this op. You stupid fag

No way, the other cards working fine, dude.
Where do you see HDMI?
720W dude

...

Same shit. BEEEEP beep beep beep.

That's an eSATA you faggot.

Try reseating the ram, plug your video cable into the Mobo first without the GPU in to see if you can even get it to POST

It's in between the serial and parallel port.

This post was you right? What mother board are you using?

I can use PC with other cards.

How can I use PC without any cards? There's no ports in MB

Omfg. This fucking hilarious. How do you people know so little. I can't believe you guys have no clue but continue to tell him what to. What's great is you are going to Fuck around so much that it will turn into an actual real problem

>>talks shit about other solutions without providing one of your own
Gr8 b8 m8 0/10

It honestly seems to be either a irq problem or that safeboot thingy some anons have been suggesting, really.