Tech Gore Thread
Last one died.
Lets go
Tech Gore Thread
Ryder Hall
Other urls found in this thread:
Jaxson Edwards
Thats too far
Nicholas Turner
so the CPU split open? or....?
Brandon Turner
Did you actually apply thermal paste to the pins of your ecu?
Carter Gray
The retard put the thermal paste under the cpu you retard
Christian Allen
lemayo
Kevin Harris
unironically did that once. friend of mine drowned his system in bear, then cola on another occasion. so i had to clean it, and this was the most efficient method. I now use the dishwasher, which is more convenient.
As long as you rinse with distilled water, and let dry for at least 2 days its usually fine after wards.
Bentley Martin
Exactly.
Sebastian Hughes
>IDE Cable
Lost
Ian Bennett
I have a couple.
Jose Clark
how does this even happen
Alexander Flores
every system has some bugs
Landon Gomez
For starters, he fucked over the socket which can't be soldered out and replaced. Then there is the literal shitfest that must be surely spreading on the rest of the motherboard.
Long story short, this fucker might had wrecked the whole pc.
Brody Cooper
well, the term did originate from actual bugs getting into computers, and bridging circuits thus causing a program bug.
You then had to debug the program, by looking for the actual insect in the computer, and removing it. thus debuging.
Parker Collins
When you let bugs rampan on the system I guess.
On pic related I still wonder the kind of master craftmanship you gotta have to pull this off.
Nicholas Butler
Ok I kekd
Landon Johnson
>t. Oldfag
I used to have a larger folder from the times when I repaired comm systems.
Matthew Robinson
Oh right, there was always this fucking asshole.
James Ortiz
doing that isnt actually that hard, it just takes an absurd amount of time to do it right. But sadly this method will most likely not work on modern cpus need length matched traces to at least the ram in order to even work. getting that with bodge wire is near impossible.
Luke Wood
This one isn't wreck'd per se, but it's still very baffling the more you look at it.
Jeremiah Anderson
Lincoln Gomez
Julian Morris
Isaiah Allen
customer computers
Henry Watson
Nope. Trash compactor or fire
Sebastian Clark
more customer computers
Oliver Watson
This has gotta be fake holy fuck
Robert Williams
still more customer computers
Noah Walker
not done yet.. customer computers
Luis Bell
last one. customer computers
Adam Reed
Fuckdammit. That was my grandma desktop right there.
Buckle up, next pics are russing.
Jordan Long
Don't forget to thank me later for this one user. You will not regret
Jonathan Gonzalez
Yup, can relate. This was everyday shit when I started working on repairs.
Kevin Phillips
Rofl that was a ballsy move tho
Lucas Lopez
Sebastian Jackson
Not even sure how was this one even possible.
Wyatt Reyes
Christian Peterson
Anthony Hernandez
just watch the verge's video
Elijah Torres
The lost city of Asus
Kevin Johnson
you would be astonished what animals can get into a computer, its a nice and warm place, so they are magnets to them.
Wyatt Watson
Michael Allen
Elijah Murphy
Nicholas Torres
Luke Hall
Thomas Scott
how is that burn damage even possible, there isnt enough current on that port to do this?!?!
(the only thing i can think of is a lightning strike)
Oliver Baker
Kinda smart tho.
Bentley Long
I always lose my shit when this happens.
Christian Perez
This is spot on right here.
Noah Rogers
This is the best thing I've ever seen. Hats off to that guy.
Angel Williams
Brandon Jones
Rat probably chewed through the cable and received low amperage for a long period of time causing the smoldering
Ryan Nelson
Might have wanted to take that battery out.
Nolan Edwards
Oh no! He let the magic smoke escape.
Hunter Garcia
Dennis? Is that you?
Lincoln Price
Asher Butler
Dylan Butler
seen a more extreme version of this IRL. dude flooded his socket with 2 tubes of thermal grease, and then added another full tube on top of it. The damn thing even worked after this. Though thermal performance was shit.
Jaxon King
Oliver Johnson
Hate it when this happens
Easton Torres
Thomas Sanders
Evan Jones
Ryan Reed
Luke Gutierrez
Austin Nelson
Hudson Nelson
This is the first creative OP on Sup Forums since 2014. You are a true hero, sir.
Carson Clark
I is cancer
Brody Johnson
Brandon Adams
Ayden Torres
William Wood
Ian Rogers
Jackson Wilson
A. It's fixable. B. The sockets are literally just soldered in and can be replaced.
Benjamin Powell
Kevin Miller
Reflow soldering. Patience and a heat gun
Kevin Phillips
Caleb Jenkins
and copius amounts of flux
Asher Morris
Jaxon James
Ahah
Cooper Long
Dam son
Bentley Green
What's the gore here? Looks like a normal crypto miner.
Asher Barnes
My old computer was like this, a super cheap for performance second hand optiplex and an RX480 graphics card. I only cut the frame though and just removed the side panel.
Cameron Torres
Crypto miners dont need several hdds faggot ahah
Kayden White
They'd tin both ends of the wires. Do the bottom first then the top. Flux could make this more difficult, splattering all over the place. Heat gun/hot air reflow can blow flux all over the place, bridge joints etc
Isaac Hernandez
Nothing to do with crypto.
Austin Lee
It is needed.
Is for PoCW method of earning, proof of cold wallets
Joseph Gomez
Reminds me of the bitcoin mine I worked at.
They told me to build it like this, I swear, and I wish they gave me something better to work with
Tyler Collins
well, the actual bodge is usually done by a small soldering iron and flux core solder, a reflow gun will only fuck you
solder should not splatter when soldering, even with flux, if it dose your running your iron too hot.
the last time i did something like this, i soldered to the chip first, then the socket, row by row.
Though dont expect it to work or be stable, since the wires are not length matched properly.
Jeremiah Sanchez
delet this MODS MODS MODS
Logan Rivera
... And nothing of value was lost.
Ryan Green
Andrew Myers
RGB EXPERIENCE
Carter Reyes
Imagine just... licking that.
Aaron Harris
Rows and rows of... antminers? From when are the pics? And how did you land that job?
Juan Thomas
this ones in an attic
Aiden Johnson
Installing a new video card? Tools required: #2 phillips screwdriver, needle nose pliers, 8" Makita rat-tail angle grinder.
Chase Hernandez
a dremmel with a cutoff disk should be enough
Xavier Cruz