>tfw just spent €100 on a top of the line Noctua cpu cooler for my AMD FX-6300 @ stock clock but it's still idling at 55C
when the fuck will AMD innovate instead of cranking up the voltage and clock speeds of their already inferno inducing processors???
>FX-6300
Just wait until Zen
Have you made sure you're using sane software to get the temperature? All bulldozer derivatives use an unconventional thermal sense or, something the software doesn't pick up on.
When you'll learn how cooling works
>are you stupid? "I want it to sit at -12C"
>he fell for AMD meme
we got another one boys!
lol good job cuck
I got my noctua cooler for free thanks to Amizon fucking up my friends order
Instead of this godawful shitty processor and expensive luxury cooler you could have just bought an Intel with the same cash.
A fool and his money are soon parted.
It's like a 2005 performance CPU with 250w tdp, whoever does that ?
>tfw spent $30AUD on Hyper 103 for i7 930 at stock clock idling at 40°C
Did you apply thermal paste? NO!
My 8320 idles at 28C with the stock cooler. You must be retarded.
My 6300 did the same.
Bought the meme 212 for cheap and OC to 4.6ghz and it still idles at the same temp. Everything works as expected because I believe in basic physics.
OP confirmed retard.
Meanwhile ...
>tfw i have my fx6300 in a case with zero airflow and my stock cooler keeps it at 30 degrees idle
how the fuck did op get 70 degrees?
i know what you mean, my cpu (8350) says its at 23 degrees then drops to around 13
try thermal paste faggot
my fx6300 sits at at 46 degrees with chink CPU cooler for 19 bucks with worn out fan,stock preapplied thermal paste, with few heavier tabs open in a browser
No it doesn't. You're using the wrong software, there is no way it idles at 13 degrees unless you live in a freezer.
He probably applied the wrong amount of paste OR he didn't screw in the screws enough OR both. I've changed pastes on my 8320 so many times throughout the years. No matter what cooler, it should usually idle around 30c. Glad I switched to Intel recently because even with my 130 dollar liquid cooler, games like battlefront at the time were causing the Temps to reach 65c. So I assumed it would get worse as games progressed. Anyway, I think he just doesn't have enough pressure on the cpu cause even small/large amounts of paste won't affect the Temps like that.
You're reading the wrong Temps friend. At the absolute lowest, cpus idle at like 26. Normally just 30c.
>spending as much on your cooler as on your CPU
Smart.
AMD CPUs report idle temps inaccurately anyway. It's funny when there are people around who actually think that their CPU is idling below ambient temp.
Yikes those older 8 core amd's are housefires.
ive had every intel cpu ive ever owned under 50degrees load and 30 on idle during HOT gaming sessions in aussie summer.
Noctura coolers fucking rule
You fuccbois don't even know the struggle of a gaymen laptop with idles at 50 and cpu+gpu at 80-90 under load.
Now imagine the above for 5.5 years straight.
I'm surprised it hasnt melted yet.
Sasuga Toshiba sensei.
gotta read what im saying, which is the thermal sense on the 8350 is off until it gets to about 30 degrees. It started off saying it was 29 degrees then rapidly drops
AMD HOUSEFIRES
AMD HOUSEFIRES EVERYWHERE
A lot of the software has the Temps mixed up so people unknowingly read the wrong Temps. Even with the best liquid cooler my AMD cpus idled at 29c and so did the Intels. Where they differed was max temp. AMD reached 65c while the Intel reached 56. The amd was an 8350 and the Intel was a 4690k.
You're literally still reading the wrong Temps.
what am i reading then?
You're reading how much of a dense faggot you are.
tomshardware.com
overclock.net
overclock.net
i know thats not the right temp, thats literally what im saying
>of cranking up the voltage and clock speeds
Stability?
There's a reason why workstation/server components (especially GPUs) are clocked lower than their consumer counterparts
this
but then I live in England so external temperature isn't factoring in either.
OP is a faggot.
Have Chrome open with:
1 stream +5 tabs, MS Word+Outlook+Winamp.
>chrome
>outlook
>winamp
whoa slow down there, are you trying to start a forest fire?
times it by 6 for each core
>5960X 8 cores
>idle temp 32°C w/ h110
>32*8=256
>therefore 5960x idles at 256°C
This
>Back in the cage,imbecile.
>I prefer it over:
>Firefox
>Thunderbird //outlook is very handy for the job.
>appointments, calendar, contacts ....,
>which you do not own
>foobar2000
>Yes, with you in there.
>I dont get it?
>firstly.6300 has not 6 true cores.
>secondly,are you saying 6*25=150°C,so the CPU is 150°C hot ???
>doesn't know how to greentext
Back to plebbiit or wherever you came from.
Nice shill
Use HWMonitor.
>winamp
My nigga
Most software doesn't implement correct temperature readings, Speccy is the worst offender
Use AMD Overdrive and Open Hardware Monitor for AMD CPU's
>the thermal sense on the 8350 is off
>I'm using the wrong software and I know it, therefore the sensor is off
Your and idiot kill you'reself
>have a 9370 with NH D15
>30 C on idle
You just suck at putting thermal paste.
You need a decent motherboard with good power phase cooling, the cheapest €50 one just doesn't have that luxury.
t. built AMD systems before
I got a 70$ Gigabyte mobo, and it works well.
FX-6300
19 deg C idle (it's about 16 in my room)
CPU: BeQuiet Dark Rock Pro II
I'm in the same boat, this fucking amd cpu is like 6 generations behind intel. The heat isn't what pisses me off it's more about the power draw and how far behind they are behind intel. I've been wanting to build a new rig for years but amd has nothing NOTHING good to offer.
As of now I'm just waiting for intel's server CPUs to drop on the used market and I will build a new rig on it. I want a server cpu because I need to extra cores for encoding video.
>idling at 55c
Nyet - pic related is my IBT load temps.
Wait for Zen.
>this fucking amd cpu is like 6 generations behind intel.
in relation to proprietary video games
festering nigger diarrhea
I'm fairly sure it's the way you've applied your thermal paste, it's prolly having air bubbles, clean your current one, add a pea in the middle and check again