I updated the bios for my Asus motherboard in stuck in this American megatrends error screen what do?
I updated the bios for my Asus motherboard in stuck in this American megatrends error screen what do?
Other urls found in this thread:
blast it with piss
un plug the ram and try to run it with one stick at a time also remove all usb devices and see if that works if your motherboard has a bios switch set it to the second bank.
Looks like it thinks a door on your chasis is open. Google is your friend.
>Chassis intrude
what kind of retarded message is this
install gentoo
some boards have a switch that if the system is opened you can set it to go into a lock down mode making the tamper obvious
My keyboard and mouse are USB devices so remove them as well?
Get a better motherboard
It means someone intruded the chassis.
Go in to the BIOS and switch "chassis intrusion" to disabled.
That's the thing I can't even get into the BIOS
le me "intrude" your "chassis" user
>2016
>updating bios
for what purpose
On your knees
>2016
it's 2017
Oh, my fault, I was surrounded with so much failure in Sup Forums that it seemed like it was still 2016.
does it beep at you can you tell us the post code
Put a jumper on that connector.
pour milk on it and put it in the microwave
Where do I get a jumper?
>he doesn't have jumpers at home
You have to be at least 18 to use this site.
Just use something that is able to conduct electricity and short the connectors shown in
>3.54mb
jesus christ
Where can i find the rest of that video?
A screwdriver can do that but I don't know where on there to do it because the picture doesn't tell me anything I can't see the letters
I was able to get into the BIOS using that little small jumper thing then I save settings in BIOS but it went right back to the American megatrends error screen
Unplug power, remove battery. Wait 1 min. Put battery back in, connect power
I don't know where the battery is
op just give us you mobo model so we can really help you also give us the location of the bios you flashed to it.
>
Enter Setup.
Locate "stop on Chasis intrusion error" (or similar).
Solved.