Can someone help me get my Galaxy S6 out of bootloop? I tried flashing some firmware but it turned out bad. Help please?

Can someone help me get my Galaxy S6 out of bootloop? I tried flashing some firmware but it turned out bad. Help please?

Other urls found in this thread:

forum.xda-developers.com/galaxy-s6/help/help-thread-question-s6-t3110220
androidfilehost.com/?fid=24545070682210639
androidfilehost.com/?fid=24438995911974845
twitter.com/NSFWRedditImage

Can you get into recovery? If so it's recoverable.

Im in recovery mode. What do I do now I only see the menu.

I know you navigate with thwbvolunbe buttons. Isn't there a factory reset option? I clear cache on mine every so often and remember that option being there

There is a factory reset option and a wipe cache option i did both and its still stuck in bootloop

Download Odin and flash a stock rom

Chip and or carrier? Depending on those, you should find recovery options on XDA

Carrier.

nigga i can help you are u there?

Yeah what's up

enter download mode click volume - , power and home a the same time, when the blue screen pops up click accept or contirnue,

download mode will display info about the firmware

soemthing like G920MUBU6AGHS

and then

a:5 b:4 e:7....ETC.

post that info

You bricked it you dumb nigger. Next time just buy an iphone.

ODIN MODE
PRODUCT NAME: SM-G920T
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: Off
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0x0500)
RP SWREV; B:3 K:2 S:2

forum.xda-developers.com/galaxy-s6/help/help-thread-question-s6-t3110220

You have a t mobile s6, shouldn't be too hard finding the tools you need. I'd just start it all over, bootloader, ROM, everything.

ok this is the exact firmware that will unbrick your device
androidfilehost.com/?fid=24545070682210639

samsung added some extra protection to their phones

the B:3 in the RP SWREV means binary 3
that means that any firmware that is not binary 3 will fail at flashing.

the firmware im giving to you is binary 3
G920TUVU3EPD1

any firmware that starts like this G920TUVU3
will work just fine,
this is marshmallow 6.0 if u had 5.1 or 6.0 will start normally if you had 7.0 u will need a hard reset (wipe user data and cache) and you are ready to go, are u familiar with the odin software?

Yeah I know what to do with odin lets see if this works

ok post results

you got it

Here's the issue y'all, it successfully flashed it doesnt boot loop but instead boots into recovery mode and Idk what to do

did u wipe data and cache after the flashing?

Yes I did and it goes to booting screen goes black then booting screen again then it shows an android dude saying error and boots into recovery mode and it keeps repeating that

the file u downloaded contained 1 big file or 4 files like
>AP_G920ETCECTECTE
>BL_G920SJKSJSKJS
>CSC_G920ÑJMNN

Just 1 big file

u could use another firmware binary 3, but if u dont want to lose time u could use the KIES software,, put the name and serial number of the phone and this software will flash the phone automatically,

its under the tools tab -firmware upgrade and initialization-

what version of android were you on before the bad flash? could be a bootloader issue.

Android 5.1.1 Lollipop

desu i would try this

its a bootloader issue this is a repair firmware

androidfilehost.com/?fid=24438995911974845

this firmware has 4 files, the big file goes to AP
the BL goes to bootloader, the CSC goes to CSC. etc

wipe data and cache after flashing if your phone doesnt work after this u are in deep shit,

try the kies method first meanwhile download the repair firmware