hey Sup Forums is this the right way to install thermal paste?
Hey Sup Forums is this the right way to install thermal paste?
not enough.
need allot more
Yup
its the really expensive diamond shit and im out do you think it will still be ok? i dont want to hurt my computer
wtf this cant be real
Please tell me this is real
Getting close, i recommend putting a little bit more in the center.
Don't use it on the corners only you retard
just take some thermal paste from the sides to the middle then you should be good
you better wash it out with something
you have to install the paste only in the center
...
exactly. try to over a lot more area
If you're using any i3 or higher cpu you need to put a lot of thermal paste in the middle
OP you retard, you're supposed to put the thermal paste on top of the cpu.
can conform, am export.
preferably use a wrench to do so.
This the guy whos dog pissed on his computer or some shieeeet from last night? Haha
with water and salt only works
ok i put some more on is it fine now?
not with these kind of contact pins. With them it doesn't matter
Jesus christ.
JESUS
can't you read? you need to cover more area than a few dots....
bit more otherwise you will burn your cpu
this
this is 100% bait
You need to add drops of water to the paste to help it dissolve even quicker
It helps thermal efficiency
You need to pretty much cover all the pins in paste, if you dont you're gonna fuck up the cpu badly
Yes.
I hurt because of this
yes this paste is too dense very bad quality not enough water
> being this... You know what? fuck it. nvm.
alrighty guys its in the case all i have to do is fire up windows 10 and check my temps
>this
it once happend to me, it when i didn't put enogh thermal paste i got fatal error and had to reinstall windows
nice case you got there OP what brand it is?
dont listen to this troll this will break your pc
its a amazon prime case its has the best airflow in the world
keep us updated with the temps.
Well you need cover the cpu with tissue otherwise your cover will go moist
checked
guys i decided to ditch the amazon prime case and went for a water cooling one instead
heres the temps
Ok thats a lot better, temps will stay down now, now need for any coolers
good idea, heat can be very damaging so theres no sense in taking risks
Don't ask Sup Forums you dumb cunt! Unless getting your computer ass raped by a bunch of trolls is something that you desire
troll? dont believe this guy!
To improve it's durability, you could try to separate the cables of your fan from the motherboard and wrap them up in duct tape so they're protected from the water. Afterwards of cause reconnect them.
Otherwise the cable material usually won't withstand water for very long (ofc they want you to buy a new PC every few years)
25 C HOLY FUCK
summerfag
I'm pretty sure. You can check by editing your bios in windows
one of the chips on my mother board started to melt what did i do wrong?
What's so special about that?
nothing a lil spit cant fix
Cover it with duct tape or electrical tape either works
>didn't put it in the freezer
>ask why it melt
>op retard
its a virus
thermal paste on the chip
i put it in my ice box lets check those temps now
That shit looks dusty. I recommend you put it in bleach for a bit it will help this god tier rig
put in bath and fill with cold ice
eat some ice cream - known fact, if the user of the pc is cold then temps will be lower
put i little thermal paste on chip
it only went down by 3
i did that and put on a zippo as a heat sink
isreal
they control our reality
try now
Dude. Get Salted Caramel Haagan Daaz. Its the food of the Gods...
didnt do much to the temps at least its not exploding now
loving the bait
ice cream is better than thermal paste
im not baiting im new to pc building and i just want to make sure my computer is safe
use ice cream as thermal paste
You need to vaccinate your motherboard, i know it has a chance of turning full autist, but youre already posting on bee, but pros: you'll reduce viruses, runs faster
ok i did. is coffee flavor ok?
>waffles
>a popsicle? cold pack?
>ice cream
>more ice cream
>more waffles in fridge
>juice puches
how are you still alive
Probably spent all their money on this sick build
fuck man i shouldve gone with the same design as you did! icecream?! how did i not think about that omg!
wat do the ice cream melted and got all over my floor
then its working
Don't forget to download the maximum rams that the board allows
put some salt on it
check temps now
new idea what if i used butter as thermal paste?
Holy shit how could we be so dumb?
Slather it in some oil and put it in a microwave for 2 minutes then in the freezer that'll sort everything out.
put a slice of bread on top of the cpu this will be gold
put some on the backside just to be sure
Doesnt bread absorb heat? This guy might be on to something, i mean, look at toast
i put salt all over just to be safe
Good work!
Let's put it in a toaster!
i only have white bread is that ok?
toast it
if only one bread use more butter
Probably, since the more it heats the better you can tell on the toast, then just let it rest and the toast should return to normal
Ans put on the upside of the white Bread Ketchup
my toaster broke so i cant i tried to fix my Nintendo switch with it but it just blew up
oven???
i tried to fix a monitor in it and it worked but theres plastic all over it now
i have a new better idea what about a peanut butter jelly heatsink???
You crazy, only seen this shit done on russian forums
update i now get over 100 fps in rainbow 6 siege
but i want at least 1k what can help with this?