Can someone tell me the value of this resistance?

Can someone tell me the value of this resistance?

Other urls found in this thread:

allaboutcircuits.com/textbook/reference/chpt-2/resistor-color-codes/)
twitter.com/AnonBabble

This is only a Linux board sorry

Resistance is futile

I'm guessing that those colours are brown, blue, orange and gold. According to this chart (allaboutcircuits.com/textbook/reference/chpt-2/resistor-color-codes/) the resistor would be 16 kilo-Ohms with +/- 5% tolerance.

If it was brown-black-orange-gold, it would be 10 kilo-Ohms with +/- 5% tolerance.

Why don't they just write the number on it instead of having color charts?

correction: 1.6 kOhm and 1.0 kOhm, forgot scientific format.
Some are very tiny, I'm guessing it'd be easier to print a band of colour than an extremely small number.

because the colours are the things that give it resistance. If you were to draw another circle the resistor would gain more resistance, depending on the colour.

Someone on Sup Forums who knows what they're talking about? Bring a coat with you when you die and go to hell anons

>Colour
>European education

British English is objectivity superior.

Had a sensible chuckle

Which part? The parts you stole from French?

1k ohms. ezpz lemon squeezy

first digit: brown is 1
second digit: black is 0
multiplier: red is 2
tolerance: gold is +/- 5%

10*(10^2)
10*100
1000

>stole from French
What exactly was "stolen"?

My God, you don't even know how your language was developed.

Came for this, leaving satisified

>your
I'm not British

>What exactly was "stolen"?
Whatever we fucking like, because We Are The Based Anglos.

"Colour" reaches us from the Latin equivalent "Color" via Old French, not via French.

u can like slow down electricity n shiet

idk some cents probably
you can get a full set for a few dollars
t. ecefag

The colors are easier to read, even if you make them small.
The system is very simple and people learn it very quickly.
black is 0, white is 9.
Then the colors in between is red yellow, blue, and grey.
The colors in between those are the mix of the neighboring colors.
eg, black = 0, red = 2, 1 is brown.
red = 2, yellow = 4, 3 is orange.

The numbering can be a bit tricky at first because sometimes the tolerance is brown and it is not as clear which direction to read from.
But in OPs case, it is clear he rotated it 180 degrees which is why it is upside down.
the colors show 102, which means 10*10^2 or 1k Ohm.
Usually people only use these large resistors in schools these days, so don't worry about it if you think it is too complicated.
But I would still advice to orient all the resistors the same way on your board, so reading the resistance is easier when they are soldered and measuring gets more difficult.

>Sup Forums - Technology

actually, it's not uncommon for large heat dissipating resistors to have their values printed on them with numbers. still, usually pretty small print. but what the others said about them typically being too small for print to be practical is true.

England was ruled by the Scandinavians for a long time until some french faggot took over in 1066.
English is a mixture of a bunch of languages, nothing is "stolen".
Then a bunch of brits went to America and the english language kept being developed in England, it didn't in America.
British english is the correct english.

>thinking "colour" is an incorrect spelling
>burger education

About 0.0000104 Bitcoin when purchased in bulk

>tfw colour blind

Oi mate r u avin a giggle?

lol stfu nerd

Do you even know where you are?

nice

it's brown-black-red and that's 1k.

1kOhm +/- 5%.

Everytime I watch BBC some reporter always adds a extra syllable or mis pronounces something. There is only one or two British accents that don't sound like a British version of Ebonics.

1k

I didnt even look on my sheet which is lies right on my other table

I opened this thread just to say that and ya beat me to it

resistors are technology.

>There is

that user isnt completely wrong though, this question is better suited for

I'm almost 100% sure that that's 10k or maybe 1k

it's the only resistor value I recognize. I don't know how to read those fucking things.

>Then a bunch of brits went to America and the english language kept being developed in England, it didn't in America.
I'm pretty sure this is the other way around. Why would GB english randomly add extra letters and swap z for s and s for c in words? I'm pretty sure American English is more modern, and thus the better version.

(301 ± 15.05) Ω
You're welcome, homework user.

kek

The autism is strong in this one.

sorry: i'm colorblind

Do your own homework, and thank your parents for paying your tuition you sleeze.

Which way are you going to put it into the circuit? The colors are what determine the resistance (except the gold, which is tolerance), so it matters if you put it in as brown, black, red or red, black, brown.