That's epoxy? I have some loctite epoxy here. I'll try it later.
Nolan Watson
>copying reddit memes nu, no one makes better cookies than me go back to ledit
Benjamin Foster
Ayyyyyyyy yo where's my gay boy seiden at? hows that 3d printed keyboard coming along? I just wanna know if it works well enough cause I'm a broke ass nigga and can't afford these chink customs, but I can 3d print shit for free.
All right, I applied the epoxy to that keycap and now I'll wait half an hour for it to cure, hopefully it works. On a side note the keyboard is working fine, I'm using it to type this. Only that one keycap broke. If anything it's an excuse for me to buy PBT keycaps.
David Perez
Already did, but I just wanna know if friction is good enough like how he did it. I was thinking of using dowel joints myself
Anyone try aliaz? Thinking about putting them on a board for the office.
Jack Perry
They're all right. I'm using MT3 keycaps right now, and they audibly strike the housing when I type at full speed. I also have an XDA set lying around. I'll try those some time and see how they do.
Wyatt Ramirez
And the keycap's working. Even tried abusing it by fast and strong keystrokes but it handled it.
Grayson Brooks
What are your thoughts on the z88 with kailh box browns? Inb4 legend is shit
Looks to be the same as the gmmk but comes with switches for 62$ cad Also anyone have experience with the patriot viper 730? Reviews seem decent, no diy switches non removable cable, USB passthrough and wrist rest Are diy switches a gimmick? Budget 70$ cad
I not the fastest typer, are they fairly silent when going at a medium pace? On a side note, how comfortable is the MT3 profile I'm thinking about jumping on the buy.
Nathaniel Lewis
just don't drop the keyboard a lot
Jose Turner
Is that a thing that happens often? I never dropped my keyboard. The keycap broke because the plastic was corroded by solder flux and then I hastily removed all keycaps to wipe and dry.
I've dropped my SSK 4 times already but that thing is made from steel so good luck breaking it
Robert Russell
>I not the fastest typer, are they fairly silent when going at a medium pace? There's noise from the keycaps striking the switch housings. They're definitely quieter than blues or clears, but not as quiet as rubber domes unless I'm very careful to type slowly. I went for 70g springs instead of the 80g or 100g options. Maybe the higher resistance on those would contribute to making it easier to type quietly. I can't really say. >On a side note, how comfortable is the MT3 profile I'm thinking about jumping on the buy. They're fucking great. A lot of people have been complaining about legend alignment problems but I don't see any on mine. I got a pretty boring set, though. Anyway, they look like a modernized SA, but feel much comfier to type on. The entire home row has a bit of a scoop to it.
Easton Murphy
Why the fuck is the G610 Orion Brown literally impossible to buy if you live in the UK? I know UK layouts exist of it as I've seen YouTube videos, amazon.co.uk only has some shitty orion reds sold by third parties though. This is driving me fucking insane, just when I thought I'd found the perfect keyboard to suit my requirements
I got the TKL Eagle garbage because it was really cheap. The stock switches (Outemu blues) seem fine. Some combinations of modifiers with arrow keys don't register, though, so I don't use it much. It's definitely a piece of shit.
true males love pink because its the true color of a decent pussy, the rest go for red being old pussy and very disgusting taste
John Adams
>he does
Matthew Edwards
>hes got a tiny dick to match his pink keycaps
Juan Russell
I'm not sure how much better I could do in terms of a quiet switch. Would you say they do a good job for what they are? I was thinking 80g myself.
>they look like a modernized SA, but feel much comfier to type on. That's good to hear, I love the look of SA and I like high profile, but I always heard SA didn't feel very good to type on in practice.
Nathan Gutierrez
I dare you to post more.
Liam Young
>he lets the rulers choose what colors he's allowed to like state slave idiot
Logan Harris
Nice excuses faggot
Jace Gray
Who cares? It's a piece of fucking shit why would you buy any keyboard made by a gaymer company? You can't even find keys for the bottom row.
Just get a Majestouch or some kind of Ducky at least. Or build something cool...
My only other point of comparison is Matias Quiet Clicks, which are better at damping both the downstroke and upstroke. The tradeoff is, they wobble a shitload (so all the keys rattle, stabilizers or not) and sometimes you just get bad switches that chatter forever no matter how many times you resolder them. Also, they have Alps-style stems instead of Cherry-style stems, so you need Alps-compatible keycaps. Aliaz uses the same style of in-stem damper as those, so in theory, they should be just as quiet. Which is why I brought up the keycaps...
Bentley Sanders
Anyone know any modifiers I could replace the blanks with that would look cool? I prefer a matching red color and similar text but I’m open to other ideas.
Damn those are fucking dope. Not exactly what I was thinking but I might use those in another build eventually. Thanks for the idea. I totally forgot about that website.
YOU WON THAT RAFFLE AND TOOK THE KEYBUDO I WANTED!!!!
At least it went to someone with the same alphas...
Blake Rivera
how do I know whether dvorak is actually better than querty in my non-english language (sw*dish)? because it seems to me like dvorak was developed with only english in mind, and that going from querty to dvorak in other languages probably isn't as good as it is in english
Bought a Viterbi, kind of regretting it. Stupid impulse buy desu but I'm a neet with few expenses so it's a tossup whether or not it was a waste of money.
pros >i like the look >split might be nice once i get used to it cons >cant use my favorite caps because i dont have an ortho kit >getting used to it is awkward >1u mods throwing me off all day >even with full programmability not that much nicer than my v60 >now i have five keyboards that arent being used >now i have three keycap sets that arent being used
Jacob Edwards
most of those ""cons"" are because of you not the board
Kevin Russell
Gaygabyte's force k83 is at 39 right now on amazon (from 79 msrp), anyone own one? How screwed am I if I buy it? I've never owned a mechanical meme before and thought it would be a good place to start
Brayden Ramirez
Can you make some cookies in the shape of little guns?
Just get the drevo Excalibur off amazon for 20 bucks less
Ayden Robinson
what keycap set can I get to make it look like more like the dark theme
Kayden Sanders
Dolch for 25 bucks
Nicholas Phillips
Matias is real good about replacing boards under warranty if you're getting a lot of chatter, just give them a call. I use a Quiet Clicks at work that was a part of a bad batch, got it swapped out with a good one.
Adam Rogers
Got these caps with the start of a nice shine off eBay
Well cherry mx brown in general just isn't well liked anymore, lots of chinese clones are better now. If you want brown I suggest gateron brown. Typing this message on them now and they're much smoother and crisper than cherry brown. If you're going to get a board with a cherry switch I personally suggest getting one of their linears. The mx speed switch is guaranteed to be retooled(means it was made using their new molds and is smoother) and they're factory lubed. MX black is also a good choice and the MX silents are well liked. $140 is just too much for a basic TKL(nice caps though) with cherry browns. Leopolds are restocking next month and are way better than varmillos(I have one of each). This is a better switch if you don't mind linear mechanicalkeyboards.com/shop/index.php?l=product_detail&p=2843 You could get a tada68 with gateron browns for less and they have great after market compatability for keycaps and cases ebay.com/itm/TADA68-fully-assembled-mechanical-keyboard-with-Gateron-and-Cherry-switch/253250240298 If you want a much better tactile than gateron or cherry brown then you could get a sabre68 or sabre60(this ones cheaper) from originative with mod-h tactile switches originativeco.com/collections/keyboards Hope this helped
Would KBD75 PCB fit a XD84 alu case? The layouts are the same and the PCB is only held by switches anyway so it should fit, but is the USB port in the same place?
Lincoln Reed
Yes but that case is garbage
Ryder Ward
check Wikipedia word frequency for languages. Then switch around the words that fit your language and you have a special layout for your language.
cookies that fire cookies? that's to complicated user
Camden Williams
what's so awful about it? (other than the flimsy support feet that I won't use anyway)